Special Price for drywall screw for Saudi Arabia Manufacturers

Special Price for
 drywall screw for Saudi Arabia Manufacturers

Short Description:

Material C1022A Diameter 3.5MM~6.3MM Length 13mm~200mm Surface treatment black/gray phosphated white/yellow galvanized Color black/gray/white/yellow Key words gypsum board screw Usage steel plate, wooden plate, gypsum board, etc Packing all as requested Details see below diagram  


Product Detail

Product Tags

Related Video

Feedback (2)

We not only will try our best to offer superb solutions to every single shopper, but also are ready to receive any suggestion offered by our prospects for pan head self drilling screw , Expansion Anchor , Unstandard Products , We are wanting forward to even larger cooperation with abroad customers dependant on mutual rewards. Make sure you sense free to make contact with us for more depth!
Special Price for drywall screw for Saudi Arabia Manufacturers Detail:

Material C1022A
Diameter 3.5MM~6.3MM
Length 13mm~200mm
Surface treatment black/gray phosphated white/yellow galvanized
Color black/gray/white/yellow
Key words gypsum board screw
Usage steel plate, wooden plate, gypsum board, etc
Packing all as requested
Details see below diagram

pp

rt

uu

 

gh


Product detail pictures:

Special Price for
 drywall screw for Saudi Arabia Manufacturers detail pictures

Special Price for
 drywall screw for Saudi Arabia Manufacturers detail pictures

Special Price for
 drywall screw for Saudi Arabia Manufacturers detail pictures

Special Price for
 drywall screw for Saudi Arabia Manufacturers detail pictures

Special Price for
 drywall screw for Saudi Arabia Manufacturers detail pictures


Which has a complete scientific excellent management technique, excellent quality and very good religion, we earn good name and occupied this field for Special Price for drywall screw for Saudi Arabia Manufacturers, The product will supply to all over the world, such as: Macedonia , Mexico , Montserrat , Upon today, now we have customers from all over the world, including USA, Russia, Spain, Italy, Singapore, Malaysia, Thailand, Poland, Iran and Iraq. The mission of our company is to provide the highest quality items with best price. We have been looking forward to doing business with you!


  • Kung Fu Maintenance demonstrates how to install piercing valves to charge sealed system refrigerators or air conditioners that are low on freon. Get KFM’s favored Multi-Meter here http://amzn.to/2l8W9CO
    Get KFM’s favored AC Gauges here http://amzn.to/2kYgGb8
    Easiest Way To Get Universal EPA Certified Prep Manual http://amzn.to/2kIQdQC
    Get the Wet Dry Vacuum used in so many KFM videos http://amzn.to/2lFxi7u
    Get the Screwdriver used in so many KFM videos here http://amzn.to/2kHFoOF
    Get the Multi Tool Pliers used in so many KFM videos http://amzn.to/2kWTjPp
    Get The Kung Fu Maintenance book here http://amzn.to/2lEQPFk
    Or the Kung Fu Maintenance E book here for less than $5 http://amzn.to/2lEY8wD
    Get the Kung Fu Maintenance album (good driving music) “Up Beat” here http://amzn.to/2l41pZ1
    Get the Kung Fu Maintenance album (nice Instrumental music) “Entropy” here http://amzn.to/2kl2U0p
    I don’t work for any of the product companies listed however I do make a small commission on items ordered through the links.

    http://KungFuMaintenance.Com

    http://Blog.KungFuMaintenance.Com

    http://Arcade.KungFuMaintenance.Com http://VGBlog.KungFuMaintenance.Com

    http://TheMaintenanceEar.KungFuMaintenance.Com

    OK. So today I’m going to be installing a bullet piercing valve on this line here, on the suction line. And we really want to do this as close as we can to the compressor, but it’s also got to be at a straight point on the compressor. A couple other factors is we’re going to need to be able to tighten down the Allen keys on the valve as well as be able to hook up our gauges, so it’s got to be aimed. Also we’re going to need it to be able to close inside there, so couple different factors. It’s most likely going to go right here aimed this way so that I can tighten the valve down and put it inside there.

    You see it’s got a little gasket inside there. The gasket presses against the material here. It also has these little adapters for the different size tubing and handy little instructions here. This particular valve can be used for 1/4, 5/16, or 3/8. This one’s pretty straightforward. We’ve got to separate both halves of the valve by loosening all of these hex head screws.

    OK, so now we got both halves separated. Again you can see the gasket inside that presses against the line. And we want to go on as smooth a spot as possible, so I’m going to clean that up real quick, make the copper nice and shiny. There’s a couple ways we can clean the copper up. We can either use, this is like a waterproof abrasive cloth, sometimes called emery cloth, or a wire brush. So you’ll be able to see how the copper gets nice and clean right there.

    And then the method the wire. With this, which with this one I think is going to be better. And of course you want to make sure your machine is unplugged for sure. You don’t want any jolts.

    So now we’re nice and clean there, and we’re ready for our valve install. So here goes that. So I’m going to be installing this on a 5/16 inch tube. So what I’m going to need is this little adapter here to go on the bottom. And then our valve is going to go on the top.

    And this adapter, I don’t know if you can see that too well. It’s got this little keyed part that fits right into the bottom of this, so it’s nice and snug in there. And we just take that and put it on like so. And now we’ll tighten down our hex head screws and position our line for optimum usability.

    OK, we want this to tighten down nice and snug here. OK, and we’re nice and tight, getting nice and tight there. OK, we’re nice and tight there.

    Now we’ll be able to use the self-piercing needle and pierce the line when we want to charge the system, or open the line, we’ll just loosen the hex head. The piercer will pierce through, and then opening the line will be done by loosening the hex head in the center. Now some of them have a straighter valve. This particular one does not, so this one is just a straight feedthrough valve. Again loosening the center hex head lets the refrigerant flow, and tightening it down seals it off.

    Anyway, that’s how to install a bullet piercing valve. I’m going to go ahead and pierce the line now. Basically it’s just got a little sharp edge on it that pierces right through the copper, and then our gasket seals all the way around that.

    Before it actually pierces, it’s a good idea to wear gloves for this. OK, so I’ve got two pairs of disposable gloves on and then also safety glasses as we go to pierce the line here. And now we’re pierced. And that should do it. You can hear the refrigerant is able to flow through here now.

    I’m just going to close this off all the way. OK, and now we are sealed. Now in order to get refrigerant, we’ll just loosen this, and that will allow the refrigerant to flow. And now we’re ready to charge the air conditioning unit, to recharge the refrigerator.



    Hi! This is the gel nails refill tutorial, I hope you like it!
    *************************************************************
    Music: www.incompetech.com Song: “Clear Air” Link: http://incompetech.com/music/royalty-free/index.html?genre=Pop

    This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.

    5 Stars By Ryan 2016-10-01 11:44
    Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!

    5 Stars By Raymond 2015-10-12 13:45

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Car

    WhatsApp Online Chat !