OEM/ODM Manufacturer truss head drilling screw for Bulgaria Importers
Material C1022A Diameter 4.2MM Length 13mm~65mm Surface treatment black/gray phosphated white/yellow galvanized Color black/gray/white/yellow Key words gypsum board screw Usage steel plate, wooden plate, gypsum board, etc Packing all as requested
OEM/ODM Manufacturer truss head drilling screw for Bulgaria Importers Detail:
|Surface treatment||black/gray phosphated white/yellow galvanized|
|Key words||gypsum board screw|
|Usage||steel plate, wooden plate, gypsum board, etc|
|Packing||all as requested|
Product detail pictures:
"Quality 1st, Honesty as base, Sincere assistance and mutual profit" is our idea, in order to create consistently and pursue the excellence for OEM/ODM Manufacturer truss head drilling screw for Bulgaria Importers, The product will supply to all over the world, such as: Kuala Lumpur , UK , French Guiana , We sincerely hope to cooperate with customers all over the world, if you would like to have more information, please kindly contact us, we have been looking forward to building up a great business relationship with you.
Here I attempted to do a complete dis-assembly, cleaning, and reassembly of an original Winchester 1892 that was built 1904 according to the serial number look up websites.
Another great design by John Browning. With production running from 1892 to 1932, Winchester produced just over one million guns in this model.
Got this particular one at an auction in 2003, would be graded out as poor, so I figured I couldn’t hurt it any more. The lever action was completely jammed and no reasonable amount of force on the lever would get the action to open. I wanted to see if I could find out what was causing that, clean it up and get it to where it would shoot again. Unfortunately I was unable to get the hammer pivot screw out, after some repeated attempts I gave up and settle for just cleaning it up the action, barrel, magazine tube, wood stock and fore-grip the best I could.
This one is in .38 wcf or .38-40 caliber, and now seems like it can fire again. I have a box of shells on the way and should be test firing it soon.
Check out some of the values for these Winchesters at: http://www.gunsinternational.com/Winchester-Model-1892-Rifles.cfm?cat_id=510
The reusable SAF-T-TORQUE Anchor is made of heat treated forged aluminum, or forged steel. Both anchors can be electro-plated. It can be manually installed, installed by using an impact wrench or by a Kelly Bar Adaptor on a derrick truck.
Available sizes (in inches): 46, 60, 72, 84 & 96
1) Can be installed and removed easily by one person
2) More holding power at less depth
3) Less time to install (average time using a 525 ft/lb impact wrench is 2-4 minutes)
4) Can be used as a permanent or temporary anchor
5) Anchor will not deteriorate due to electrolysis if copper coated
6) Guy wire tensioning can be done by screwing anchor in ground
7) 70% less torque to install than a 10″ helix anchor with an 8′/3/4″ rod
By Julia 2016-11-16 17:16
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Gary 2016-9-12 12:27