OEM China High quality truss head self tapping screw for Thailand Factory
Material C1022A Diameter 4.2MM Length 13mm~65mm Surface treatment black/gray phosphated white/yellow galvanized Color black/gray/white/yellow Key words gypsum board screw Usage steel plate, wooden plate, gypsum board, etc Packing all as requested
OEM China High quality truss head self tapping screw for Thailand Factory Detail:
|Surface treatment||black/gray phosphated white/yellow galvanized|
|Key words||gypsum board screw|
|Usage||steel plate, wooden plate, gypsum board, etc|
|Packing||all as requested|
Product detail pictures:
Adhering towards the theory of "quality, support, efficiency and growth", we've attained trusts and praises from domestic and international client for OEM China High quality truss head self tapping screw for Thailand Factory, The product will supply to all over the world, such as: United Arab Emirates , Italy , Netherlands , We aim to become the modern enterprise with the commercial ideal of "Sincerity and confidence" and with the aim of "Offering customers the most sincere services and best quality products". We sincerely ask for your unchanged support and appreciate your kind advice and guidance.
http://www.homebuildingandrepairs.com/stairs/index.html Click on this link if you have more questions about stair stringers, stairway design for staircase construction. If you’re planning on building a stairway, don’t forget to check out our website and some of our popular books on stair building. Even though this video provides us with five ways to connect your stair stringer to other parts of the building or structure, there are plenty of other construction methods you can use to accomplish same thing, but that would probably be a two-hour video. To learn more about construction, carpentry and home repairs, keep watching these helpful videos and don’t forget to visit our websites.
Shop Shelf any mechanic can build !
This is low foot print ,high load shelf for heavy auto parts that can be adapted to many uses.
I used 2X4X10 uprights to hold eight…..8 foot long shelves.
The center between uprights is approx. 7 foot this is the secret to avoiding ‘sagg’ with heavy loads.
All the 2X4′s can be spliced.The cross bracing @ 16 inch centers allow you to use scrap plywood or press board for shelving.
I used 21/2 inch drywall screws to assemble…..AND 12 penny nails (12 pennies equals weight of each nail) marked 12D on box.
Don’t over nail or screw. The shear strength of nails`or screws is waaaaaay beyond what you can load these shelves.
If you want use liquid nail and clamp pieces
These shelves give approx 210 sq ft of space on a 16X1 floor space foot print.
Most of the shelves extend 8 inches in the back due to the steel girder of the metal building.
Assemble each shelf frame first -install between the 2X4 uprights then add your plywood last .This cuts down on the weight you have to handle for each shelve.
Use clamps to hold in place as you screw. (Nails can be driven in as the second fastener @ each secure point)
Set a shelve space distance (example 10 inches) at one inside point as start place.Then use a good level to secure your other 3 points.
Eye ball your 2X4 for straight pieces to use as the 8 foot sections. Cut twisted pieces into the short cross pieces on the 16 inch centers.
Use your best or new wood on the front for appearances !
For longer spans than 8 foot you can use 2X6 . Remember the design idea is maximum shelf space with least wasted space.
I am located at 1991B US 501, Myrtle Beach, SC 29577. I can be reached at 843-455-8062.
By Alexandra 2015-11-30 13:28
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Jerry 2016-9-19 11:11