Good quality 100% truss head self tapping screw for kazakhstan Importers

Good quality 100%
 truss head self tapping screw for kazakhstan Importers

Short Description:

        Material C1022A Diameter 4.2MM Length 13mm~65mm Surface treatment black/gray phosphated white/yellow galvanized Color black/gray/white/yellow Key words gypsum board screw Usage steel plate, wooden plate, gypsum board, etc Packing all as requested    


Product Detail

Product Tags

Related Video

Feedback (2)

"Quality 1st, Honesty as base, Sincere assistance and mutual profit" is our idea, in order to create consistently and pursue the excellence for Iron Screw , Concrete Steel Nails , pan head self drilling screw , Adhering towards the enterprise philosophy of 'customer very first, forge ahead', we sincerely welcome shoppers from in your own home and abroad to cooperate with us.
Good quality 100% truss head self tapping screw for kazakhstan Importers Detail:

 

 

 

 

Material C1022A
Diameter 4.2MM
Length 13mm~65mm
Surface treatment black/gray phosphated white/yellow galvanized
Color black/gray/white/yellow
Key words gypsum board screw
Usage steel plate, wooden plate, gypsum board, etc
Packing all as requested

yyjf

 

oi

 

nhl


Product detail pictures:

Good quality 100%
 truss head self tapping screw for kazakhstan Importers detail pictures

Good quality 100%
 truss head self tapping screw for kazakhstan Importers detail pictures

Good quality 100%
 truss head self tapping screw for kazakhstan Importers detail pictures


We also supply products sourcing and flight consolidation services. We now have our personal manufacturing unit and sourcing business office. We can give you almost every variety of solution related to our merchandise assortment for Good quality 100% truss head self tapping screw for kazakhstan Importers, The product will supply to all over the world, such as: Orlando , India , Pakistan , With excellent merchandise, high quality service and sincere attitude of service, we ensure customer satisfaction and help customers create value for mutual benefit and create a win-win situation. Welcome customers all over the world to contact us or visit our company. We are going to satisfy you with our expert service!


  • http://www.aaronequipment.com/usedequipment/conveyors/screw-conveyors/45198006
    Used- Incline Screw Conveyor, 304 Stainless Steel. 6″ Diameter x 156″ long x 3″ pitch screw. Top end feed, bottom end discharge. 2 Section top cover. Driven by a 2hp, 3/60/230/460 volt, 1740 rpm gear motor, ratio 25 to 1, output approximate 70 rpm. Mounted on a carbon steel frame.



    The standard method of covering a polytunnel is to dig a trench around the base of the framework and bury the polythene cover in the ground. In this video we show you how to do this.
    Dig a trench around the polytunnel framework – the trench should measure 14in deep x 1 spade width.
    Roll the cover out down one side of the polytunnel and, holding the edge of the sheet, pull over the framework. Check the cover is central down the length and width of the tunnel – do not worry if the cover does not reach the floor on the ends of the polytunnel.
    Starting at one end of the polytunnel, fix the polythene to the timber door frame lintel using a timber batten and nails. Pull the cover tight along the length and fix to the timber lintel at the opposite end.
    Down one side of the polytunnel, starting in the middle, tension the polythene cover down into the trench and backfill the soil on top. Continue this process out to each end of the polytunnel.
    Repeat this process on the opposite side of the tunnel – this time getting as much tension into the cover as possible. It is acceptable to stand on the cover in the trench to get the required tension.
    At each corner, cut the polythene in line with the end hoop below ground level. Pull the excess around the end hoop to the door frame, twisting your wrist to create pleats in the cover. Fix the cover to the door frame using timber batten – the batten should be fixed tight up to the rebate batten.
    Repeat this process at the opposite end.
    At each corner, tension the cover down into the trench from the hoop to the door post.
    Taking care, trim off any excess around the door frames.

    Polytunnel Construction FAQ’s – http://www.premierpolytunnels.co.uk/construction-advice/

    Discover more about Polytunnels on our website – http://www.premierpolytunnels.co.uk – or call the team on 01282 811250.

    Let’s Get Social!
    Facebook – https://www.facebook.com/premierpolyt…
    Twitter – https://twitter.com/PolytunnelSales
    Instagram – https://www.instagram.com/premierpoly…
    Pinterest – https://uk.pinterest.com/prempolytunn…
    Join our mailing list – http://www.premierpolytunnels.co.uk/c…

    Subscribe to our YouTube channel now!

    It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.

    5 Stars By Jonathan 2016-8-19 15:58
    Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
    5 Stars By Victor 2015-11-18 16:21

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    WhatsApp Online Chat !