China Factory for drywall screw for Auckland Factory

INSTRUCTIONS
step 1-subscribe……..keep reading for more info.
heres a easy way to turn and old feeder into a bump feeder or make a new one.gonna need a wooden dowel.determine how low you want the dowel to hang.(for hogs or not)cut dowel to desire lenght.screw 2 to 4 screws at the top of the dowel.(2 to 3 in screws or nails)dont go all the way through.this is what will keep the dowel from falling through the barrel or bucket.you can also drill a hole through the dowel and use a long bolt or matal rod.(if you have this probaly would work best and last longer)next if dealing with an old feeder,remove timer.take off funnel or cone from bottom of barrel.if theres not one,you can find these at any store that has a hunting department.your dowel also needs to be able to fit through the funnel as well.take your dowel,place it in the barrel(or bucket).then take the funnel and slide it up the dowel.want the larger end towards the barrel(just like it was in the feeder).get it about a half inch space.put some corn in the barrel.adjust the height of the funnel so that corn only falls if dowel is moved.(not sitting still)then take some screws and screw them into the bottom of the funnel.prevents it from sliding down.and your set.you now have a bump feeder.if you are going to use a bucket for this and hunt hogs,make sure its a metal bucket.they’ll tear it up if not.make sure to get a measurement on the small hole on the funnel so you know what size dowel to get.if starting from scratch,make sure not to cut the hole in the bottom of the barrel bigger than the top of the funnel.any questions just ask.thanks for watching Bohemian Hunting Club

BBT Livestream on finishing build and answering questions.

Open Air Frame

Case Size (28 x 18″ x 11.5″) (total cut size and amount of material:
4x 28″ pieces of Angled Aluminum
4x 18″ pieces of Angled Aluminum
4x 12..5″ pieces of Angled Aluminium
5x 18″ of pine planks planks
1x 28″ section of pine

3x 8 foot sections 1/16″ x 1″ angled aluminum
2x 8 foot sectionts of 3/4″ x 3.5 pine wood planks
#8×1/2″ Self tapping screws

Components:
8x EVGA GTX 1070 SC 8GB – http://amzn.to/2szBlbs
Asus Prime Z270 AR/A – http://amzn.to/2txi1ZV
EVGA Supernova 1300 G2 – (alternative psu due to availability) http://amzn.to/2szZ9vO
ntel BX80677G3930 7th Gen Celeron Desktop Processors – http://amzn.to/2txtLeQ
HyperX FURY Black 8 GB 2133 MHz CL14 DIMM DDR4 – http://amzn.to/2rpQadb
PCI-e Riser – http://amzn.to/2rpYhX8

ORICO Dual-bay 2.5-inch/ 3.5-inch USB 3.0 to SATA 3.0 External Hard Drive Docking Station with Offline Clone Function – http://amzn.to/2rpR6yd

6-Pin PCIe to 8-Pin PCIe Adapter Power Cable – http://amzn.to/2sbBwZY

Claymore Eth only
Overclock = 100/500
Result = 29.4 per card (total system 243mh)

Nicehase 1.7.5.12
Overclock = 100gpu/500mem
Result =3072sol’s/h

Add2Psu – http://www.add2psu.com/

Simplemining setup live tutorial vid – https://www.youtube.com/watch?v=PAHWMK78Gag

Simplemining NVidia Build – https://simplemining.net/download/simpleminer-RX-v1096-kernel4.11.4-amd16.60-nvidia375.66-i915fw.imgc
DEV WARNING: BETA!!! Overclocking is NOT WORKING NOW! Use at your own risk.

People keep asking for our donation address = we will use your funds to make a more regular and episodic video series:

If this has helped you and you can afford it, your welcome to donate. We try to make all of this information FREE for you to watch and learn. Donations are accepted as an appreciation for the effort we are putting forth. Thanks a lot folks (plus it helps us get better gear and content produced!)

Channel Donations
BTC: 1QHADdYwmMgVoaYqqY3SE8ummr4euHqzUv
ETH: 0xF897EaFdb787AcD4Da5e2EB5003E42dc1Ef86d39
ZEC: t1axFZp6kZECrVPyhBRLX4756NV95KEwPp2
LTC: LaFsw3cBEB88ZcXbJ6CXUuMdQLKDwZanZj
REP: 0x53433a8576a909290f6986d3f95c977fa28bda53
ETC: 0x903ef517acca761a9405e05cc1cd231848625778
DSH: Xrk5429K5GUHkQJkDcUQ1ZtwSGwwRstxK4

Or you can use paypal for USD:

Paypal: PayPal.Me/bitsbetrippin