11 Years Manufacturer pan head self drilling screw for Tunisia Factories
Product name: pan head self drilling screw Material: Copper, Carbon steel, Stainless steel 304/316/410 Size: M0.8-M36, Can be customized Surface Treatment: Black oxide ,phosphate ,zinc plated, nickel-plated and dacromet Grade: 4.8, 8, 10.9,12.9, etc Certificate: ISO9001:2008,ISO14001:2004 Standard: ISO,DIN,GB,JIS,BS,ANSI, Non-standard Quality control: ISO standard,100% Whole range inspection through the production Advantage: OEM/ODM are available Sample: Sample is free, i...
11 Years Manufacturer pan head self drilling screw for Tunisia Factories Detail:
|Product name:||pan head self drilling screw|
|Material:||Copper, Carbon steel, Stainless steel 304/316/410|
|Size:||M0.8-M36, Can be customized|
|Surface Treatment:||Black oxide ,phosphate ,zinc plated, nickel-plated and dacromet|
|Grade:||4.8, 8, 10.9,12.9, etc|
|Quality control:||ISO standard,100% Whole range inspection through the production|
|Advantage:||OEM/ODM are available|
|Sample:||Sample is free, if we have the tools available|
|Delivery detail:||7-15 days|
Product detail pictures:
To meet the customers' over-expected pleasure , we've our sturdy group to offer our best overall service which incorporates advertising and marketing, product sales, designing, production, good quality managing, packing, warehousing and logistics for 11 Years Manufacturer pan head self drilling screw for Tunisia Factories, The product will supply to all over the world, such as: Milan , Qatar , Solomon Islands , In order to carry out our goal of "customer first and mutual benefit" in the cooperation, we establish a specialist engineering team and a sales team to supply the best service to satisfy our customers' requirements. Welcome you to cooperate with us and join us. We have been your best choice.
PATCHING, FILLING & GRINDING
Patching & Repairing Your Concrete
What You Need:
•Jiffy Mixer or Putty Knife
•Broom or Shop-Vac
•Hand Grinder or sander
•Latex Protective Gloves
•Small Mixing Container
•Self-Leveling Sealant or Patching Compound
Filling in divots, pits and cracks is an optional step. Hairline cracks will be filled in with the primer epoxy and do not require special attention unless the crack is wide or deep. Patch all pits and cracks by utilizing a concrete patching compound.
Use a self-leveling sealant, which is also a flexible coating, to fill in expansion joints. This is an optional step based on your personal preference. Please clean and remove all debris from the expansion joints before applying.
It is extremely difficult to completely hide an expansion joint; therefore it is recommended to fill it in as much as you can. Applying this also allows the concrete to move without cracking it. Fillers must dry overnight before applying any coatings.
To repair your cracks and divots, use Norcrete Crack Filler. This two component 100% solids epoxy crack filler is designed for shallow repair on either vertical or horizontal surfaces. This product is easy to mix and use and has a non-critical mix ratio. Additionally, because it is a 100% solids formulation, it can be applied thicker on horizontal surfaces when required.
This product has a mix ratio of 1 part A to 1 part B by volume. To mix, simply measure out equal volumes of the material and mix them together thoroughly with slow speed mixing equipment such as a jiffy mixer, putty knife until the material is thoroughly mixed and uniform in color. Mix only an amount of material that can be used in the allotted pot life period. Improper or insufficient mixing may result in product failure.
If you are having a hard time spreading the compound because of its thick consistency, dip your putty knife in a xylene solution and spread the patching compound. Zylene is a thinning agent and will help smooth out the consistency for easier application.
Here is another trick to get the patching compound as even and level to the surface as possible. Dip a paintbrush in some Xylene and brush it over the patched area to smooth the surface.
After you have patched the surface and waited the appropriate cure time, you can now begin to grind the surface. By grinding the patched areas, you will be leveling the surface of your concrete. This creates a seamless surface so you will no longer see the patched areas once you apply the coating.
We are the biggest producers in the world for manufacturing big diameter bolts in stainless steel and high tensile from M-20 to M-100 in diameter , fasteners and nuts which are used in water projects, water pipelines, sewage water treatment plants, sewage water projects and pipelines, desalination projects
By Jean 2016-7-23 19:06
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Stephen 2016-7-12 13:33